FAQ and Troubleshooting
Need help with your IMeasureU sensors? Find solutions here
When setting up your IMeasureU sensors it is important to set the appropriate capture rates for your desired sensor mode. IMeasureU sensors offer 3 sensor m...
Wed, 27 Jun, 2018 at 3:15 PM
When attaching the IMU inertial sensors to subjects there are two main things to consider: attachment method and physical placement of the sensor. Attac...
Fri, 17 Aug, 2018 at 2:11 PM
We recommend using the Bluetooth dongle supplied with your IMUs. However, if you do find yourself wanting to use a Bluetooth dongle different to the...
Fri, 14 Sep, 2018 at 10:45 AM
Please use this guide if you are having issues with pairing your IMeasureU sensors to your PC via Bluetooth. The Basics, we're all guilty of sometim...
Fri, 17 Aug, 2018 at 2:12 PM
Occasionally the IMU sensors struggle to connect with Windows or Vicon Nexus. In some cases it can be useful to clear the Bluetooth connection settings stor...
Fri, 17 Aug, 2018 at 2:12 PM
The "typical run time" for a fully charged IMeasureU sensor is 4 to 6 hours. This means that trials of up to 4 to 6 hours can be recorded and wit...
Fri, 24 Aug, 2018 at 3:18 PM
The X, Y, and, Z axis for the IMeasureU inertial sensors are shown in the diagram below. Using the orientation of the sensor in the diagram above as a ref...
Fri, 31 Aug, 2018 at 9:39 AM